One Bedroom - A$472.50
Two Bedrooms - A$537.50
Three Bedrooms - A$602.50
Four Bedrooms - A$667.50
Carpet Cleaning - A$195.00
Surfaces We Clean
Concrete shows up everywhere — and so do we. Our concrete pressure washing service covers a wide range of surfaces across Newcastle, from everyday residential areas through to heavy-duty commercial and industrial sites.
Residential Concrete
Most of our residential work covers driveways of all concrete types, garage floors and workshops, pathways and walkways, patios and outdoor areas, pool surrounds, shed floors, and carports. Each of these surfaces collects its own brand of grime — oil stains on the garage floor, algae creeping across the patio, tyre marks baked into the driveway. We treat them all.
Commercial & Industrial
On the commercial side, we regularly service warehouse floors, loading docks and bays, car parks, shopping centre paths, factory floors, business entrances, and strata common areas. These spaces tend to carry heavier contamination — manufacturing residue, chemical spills, years of heavy traffic — and they need equipment that’s actually up to the job.
Pavement Types We Work With
We clean plain concrete, exposed aggregate, stamped and decorative concrete, concrete pavers, asphalt (using a gentler approach suited to the surface), and industrial flooring of all types.
Newcastle Areas We Service
• Commercial: Newcastle CBD
• Industrial: Mayfield, Wickham
• Business Parks: Kotara, Charlestown
• Residential: Throughout Newcastle and surrounds
What We Remove
If it’s on concrete, chances are we can get it off. Our concrete cleaning Newcastle service is built around heavy-duty stain removal — the kind of stubborn contamination that a garden hose and a scrubbing brush was never going to touch.
Oil & Automotive
This is the big one for garage floors and driveways. Engine oil and grease, transmission fluid, brake fluid, tyre marks, and fuel stains all respond well to our hot water extraction and degreaser pre-treatment process. Even stains that have been sitting there for years will show significant improvement — more on that in the FAQ section below.
Industrial Stains
For commercial and industrial sites, we regularly deal with chemical spills, paint and coatings, rust marks, and general manufacturing residue. These need the right chemical pre-treatments matched to the specific contaminant — not just high pressure and hope.
Environmental Buildup
Newcastle’s humidity and coastal conditions create the perfect environment for algae, moss, mould, and mildew to take hold fast. Salt deposits from the coastal air leave white residue on surfaces and accelerate surface degradation. Weathering stains, dirt, and general grime round out the picture.
It’s worth paying attention to algae and moss specifically — these aren’t just an eyesore. On shaded driveways, pathways, and pool surrounds they become genuine slip hazards, particularly after rain. Removing them properly is as much a safety job as it is a cleaning one.
Other Contaminants
Gum and adhesives, food and beverage stains from commercial areas, and general traffic marks all fall within our scope too.
Our Cleaning Process
There’s a big difference between a quick rinse-down and a proper concrete clean. Here’s how we actually approach it.
1. Assessment
Before a drop of water hits the surface, we assess the concrete type and condition, identify specific stains and contaminants, flag any slip or safety concerns, and select the appropriate pressure settings and chemical treatments for what we’re working with. Getting this right upfront is what separates a good result from a great one.
2. Pre-Treatment
Most heavy staining needs chemical pre-treatment before the pressure washing even starts. Oil and grease get a commercial degreaser applied first. Other contaminants get matched to a specialised treatment suited to that specific stain type. We allow proper dwell time so the chemistry can penetrate and break down the stain — not just sit on top of it. Hot water is brought in where it’s needed, particularly for oil removal.
3. High-Pressure Cleaning
We run commercial-grade equipment operating between 3000 and 4000 PSI, paired with surface cleaner tools that deliver even, consistent coverage across the whole area. We work in systematic passes, give proper attention to edges and corners, and run multiple passes over severe staining where needed. This isn’t a one-pass-and-done approach.
4. Post-Treatment
Once the cleaning is done, we carry out a final rinse and thorough inspection. Where needed or requested, we can also apply anti-slip coatings or sealant at this stage — both of which are covered in detail further down the page.
Our Equipment
Industrial pressure washers, hot water systems purpose-built for oil removal, surface cleaner attachments for large areas, and professional-grade commercial chemicals.
Specialised Applications
Some concrete surfaces need more than a standard clean. These are the jobs where the right approach, equipment, and experience really make the difference.
Garage & Workshop Floors
This is where years of automotive work leave their mark — layers of engine oil, transmission fluid, grease, and general workshop buildup ground deep into the concrete. Our hot water extraction and degreaser process tackles heavy oil staining that regular pressure washing simply won’t shift. Beyond the obvious aesthetic improvement, a properly cleaned garage floor is a safer, brighter workspace. Clean concrete reflects light better, and removing oil and fluid residue reduces slip risk significantly.
Commercial Car Parks
Large area efficiency matters here. We work systematically to cover big spaces without dragging the job out, treating individual oil spots with targeted pre-treatment while preserving any existing line marking. For property managers and strata committees, we also offer regular maintenance programs that keep car parks looking presentable year-round and minimise the kind of heavy buildup that costs more to remove later. We schedule around business hours to keep disruption to a minimum.
Industrial Facilities
Factory floors, loading docks, and warehouses carry contamination that goes well beyond everyday grime. Manufacturing residues, chemical spills, and heavy traffic buildup are part of the regular workload for industrial concrete cleaning Newcastle clients. Safety compliance is often a driver here — clean, slip-free floors aren’t optional in a workplace setting. We offer scheduled cleaning contracts for facilities that need regular maintenance built into their operations.
Food Service Areas
Outdoor dining areas, commercial kitchen surrounds, and food court pavements need a different kind of attention. Grease removal, hygiene standards, and council compliance all come into play. Regular maintenance is particularly important here — grease and food residue on concrete becomes a slip hazard and a hygiene issue fast.
Surface Protection: Anti-Slip Treatment & Sealing
Cleaning concrete gets you a great result — protecting it afterwards is what makes that result last, and keeps the surface safe between services.
Anti-Slip Treatment
Slippery-when-wet surfaces are more common than most people realise. Shaded pathways where algae regrows quickly, pool surrounds, areas with elderly or disabled access, and commercial properties with public liability concerns are all situations where anti-slip treatment makes real sense. For commercial operators especially, a slip and fall incident carries consequences well beyond the cost of a coating application.
Treatment options include anti-slip sealant application, textured coatings for a more aggressive non-slip finish, and chemical treatments that etch the surface slightly to improve traction. Newcastle’s humidity means algae and moss can return to a clean surface within months — regular cleaning combined with anti-slip treatment is the most practical way to stay ahead of it.
Concrete Sealing
Fresh, clean concrete is actually the most vulnerable it’s going to be — the pores are open and anything spilled goes straight in. Applying a sealer after a deep clean locks in that result and creates a barrier against future staining. Maintenance cleans become faster, cheaper, and easier on the surface long-term.
Penetrating sealers protect from within, leaving the surface looking completely natural. Surface sealers sit on top and leave a slight sheen — ideal for decorative or stamped concrete. Non-slip sealant options are available for both, particularly relevant for pool surrounds and pathways. Sealing is always optional, but for clients wanting to protect their investment and extend time between major cleans, it’s well worth doing.
Residential vs Commercial Services
Concrete cleaning Newcastle looks different depending on who we’re working for and what the surface needs to achieve. We tailor our approach accordingly.
Residential Services
For homeowners, the focus is usually aesthetic — a driveway that looks clean and well-maintained, a patio that’s safe for kids and guests, a garage floor that doesn’t look like it’s been through ten years of oil changes. Most residential jobs are one-off or annual services, and we offer weekend availability to work around busy family schedules. We’re in and out without disrupting your day, and the results speak for themselves.
Commercial & Industrial Services
Commercial concrete cleaning is a different scope entirely. Large surface areas, heavier contamination, tighter timeframes, and compliance requirements all factor in. We bring large-area equipment suited to the job, offer after-hours and weekend scheduling to minimise business disruption, and work with property managers, facility managers, and strata committees to set up scheduled maintenance contracts that keep surfaces consistently clean and safe. Efficiency matters here — we don’t slow your operation down.
What Both Receive
Regardless of whether it’s a residential driveway in Warners Bay or a warehouse floor in Mayfield, every job gets the same professional-grade equipment, experienced crew, appropriate cleaning methods matched to the surface and contamination type, and results that are actually worth the investment. Residential clients usually need us once or twice a year. Commercial clients often benefit from a regular contract — and we make that straightforward to set up.
Frequently Asked Questions
Most oil stains respond really well to our hot water extraction and commercial degreaser process — even ones that have been sitting there for years. Very old stains that have fully penetrated deep into the concrete may lighten significantly rather than disappear completely, and we’ll always give you an honest assessment of what’s achievable before we start. That said, the results on heavily soiled garage floors consistently surprise people who assumed the staining was permanent.
Typically between two and four hours, depending on weather conditions and how much sun the surface gets. You can walk on it sooner than that — foot traffic is usually fine within an hour or so — but we recommend waiting until the surface is fully dry before driving vehicles onto it. If sealing is being applied after the clean, we’ll give you specific drying times for that too.
Yes. Scheduled cleaning programs for car parks, warehouses, loading docks, and industrial facilities are a core part of what we do on the commercial side. Regular contracts work out more cost-effective than one-off jobs, keep surfaces consistently maintained, and mean you’re not dealing with heavy buildup that costs more to remove later. Get in touch and we can put together a program that suits your site and schedule.
It depends on the surface and situation. For pool surrounds, shaded pathways prone to algae regrowth, areas with elderly or disabled access, and commercial properties with public liability exposure — yes, we’d strongly recommend it. For a sunny north-facing driveway with good drainage, it may not be a priority. We’ll give you a straightforward recommendation based on what we actually see on the day.
Local Cleaners you can Rely on in Newcastle, NSW.
